Maswell launched a new series of metal chip antenna products, WiFi/Bluetooth 2.4/5.8GHz dualband Metal SMD Chip Antenna AN_W_CA_2630_T05, covering the frequency range of dual band wifi 2400~2500MHz and 5150~5850MHz with a gain of 3dBi. The matching circuit of this chip antenna is 2630 PCB foot print which is ideal for SMD mounting with limited space. The AN_W_CA_2630_T05 is an obvious low cost antenna solution for dual band Wifi/Bluetooth applications which requires minimized mounting space.
Figure 1. Product Diagram
Figure 2. Dimension
Product Parameters of AN_W_CA_2630_T05 :
| Item |
Specifications |
| After Matching |
2400~2500MHz/5150~5850MHz |
| Efficiency |
>60% |
| Peak Gain |
3dBi |
| V.S.W.R |
≤ 2.0 |
| Polarization |
Linear |
| Azimuth Beam Width |
Omni-directional |
| Impedance |
50Ω |
Application of AN_W_CA_2630_T05:
Wearable Equipment
IoT Equipment
CPE Equipment
AR / VR Equipment
Car audio and video system
Figure 3 Antenna Radiation Orientation Diagram
Packing description: Reserve a length of 150~200mm for the trailer ofthe carrier and 250~300 mm for the leader of the earrier and further 250mm of cover tape at the leading part of the carrier.
Storage conditions: Oxidizable, 12 months in vacuum sealed bag. Material, please repack within 168 hours by re-seal the package treatment after use them!
Storage Temperature Range:<30 degree C Humidity:<60%RH
